Burst pipes are not the same as burst pipes repair cost. To burst pipes, the professional must remove the old pipe first. Once removed, he can dispose of it properly. If the old pipe is still in good condition, there will be no problem in removing it. However, if it is a faulty pipe, it may be a different story. Let’s see what needs to be done after removing a faulty pipe from your house.
There are two options for burst pipes repair. You can hire a plumber who will come to your home and dismantle the pipe sections and install a new one. This will cost you more. Another option is to call a plumbing company which will send a technician to your place to dismantle and install the sectioned-out piping. The average charges of such a plumbing company to repair a burst pipe is around $ 900.
The good news is that sometimes bursting pipes are just a matter of replacing the drain segment or diverting the water away from the affected section of pipes. For example, if you find that the burst pipes stem from a kitchen sink trap, the technician can unscrew it, repair the pipes and replace the trap with a new one. Such a plumbing job can cost around $ 200. However, if the plumbers find that the problem is with the main drainage line, he will have to call in a drain snake auger to remove the blockage and repair the drain pipe repair.
There are many factors involved in the causes of burst pipes. Some of the common causes are seepage, hair, food, or anything that goes into the drain trap. The following are some common causes and of course, the solution for each is very much different. In this article, we’ll show you the different ways on how to fix each of the common causes and of course the common DIY home repair.
Seepage is the most common reason for burst pipes. That’s why we usually call the area “septic tank problem”. Small webpages can be dealt with by cleaning the area and refilling it with new soil. But bigger seepages will require pumping and other expensive and complicated maintenance procedures.
Hair is another one of the reasons for burst pipes. Normally, when we wash the kitchen sink, showerheads, and other fixtures in our house, small bits of hair fall and stick into the pipe, which causes a small break. In case these small pieces of hair are long enough, they can even penetrate the inside wall of the drain pipe. To avoid this type of damages, it is recommended to use a commercial hair remover that can effectively remove the trapped hair within minutes. If you want to do it on your own, you need to be qualified plumber or a pipe repairing expert to be able to solve the problem.
Contact a Plumber
Let’s go back to the burst pipes. Typically, these damages can’t be seen from the outside since they usually occur close to the walls. Once you see a hole, it’s a good idea to contact an experienced plumber to give you an estimate of the repairs needed. If you have any doubts about the size of the pipe that’s causing the burst, it’s best to hire a professional who will give you a proper estimate of the damage. He is also the right person to make sure that the right materials are used so you won’t need to spend more money on repairs and maintenance.
One other common plumbing emergency that causes pipes to burst is a toilet that leaks. There are many different causes of why a toilet may leak. Common causes include aged pipes, the insufficient flow of water, and the presence of rust or iron deposits. Although not as common as leaks from sinks or faucets, toilets leaks are still worth fixing. In case you have a toilet that’s leaking, you may want to consider replacing it with a newer model since it may be the cause of the leak.…